Landlord
Published on 2023-2-7 12:28
), if set to fixedOption 1 (Failure)It must be re-routed on the primary routeOption 2 (a successful compromise solution, it is recommended to try the third option first, if it doesn't work, use this again)From the phone    Finally I put it on Windows
Posted on 2023-2-7 06:28
newIf not set, Windows and intranet devices will use the primary route for IPv6 DNS resolution by default, and Windows will preferentially use IPv6 DNS to resolve IP addresses, and will not use IPv4 DNS because the IPv6 DNS resolution server is no longer accessible.onPing-throughissue, the 4th bit is unchanged, but it is also impossible to use IPv6 to access the Internet."Change backBecause each time the primary route is restarted, the 4th and 3rd bits of the public and private IPv6 addresses of the primary route change (
    Then take the primary route, the side route, the secondary route, and the tertiary route...... reboot the device in order, and all devices on the intranet should be available
suggestionTutorial to set up the default DNSv6 server for the private network (DNS resolution server for IPv6), i.e. set the DNSv6 server for the internal network (LAN) (IPv6 for Openwwrt - advertised DNS server) in the primary route Padavan/Openwrt This post was last edited by Jackson798 on 2023-2-7 12:37 LandlordIPv6 local address of N1 and use N1Primary routeabove
Published on 2023-2-7 09:32
202520242023202220212020201920182017201620152014201320122011201020092008200720062005200420032002
Configure the Adguard Home and smartDNS sider N1 with Adguard Home and smartDNS enabled after IPv6 is enabled...
ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9
I changed the "DHCPv6 Service" option to "Server Mode" at the LAN port in N1, restarted all the routing devices, and the network was normal againScenario 3 (Successful but I don't know if there are other hidden dangers - network security/lag, etc.)Both external network (WAN) interfaces are reconnected
and0Set the old N1 IPv6 address to be inaccessible, i.e. every time the home is powered off, the router restarts, or not
detail

Please see the 2nd floor for the modification plan (the picture below shows the current LAN structure at home)

For the configuration of dial-up of the primary route and the allocation of IP addresses by DHCP, and the IPv6 settings on the primary route, please refer to "
Manually set in the internal network - IPv6 DNSJapanese
I use it again to see that it is unstable, and this setting is no longer a problem after changing the reply to the second floor.